**What Is The Best Cheap OBD2 Programmer For Your Car?**

The best Cheap Obd2 Programmer offers a cost-effective solution for vehicle diagnostics and basic programming. OBD2-SCANNER.EDU.VN provides expert insights to help you choose the right tool. Let’s explore your options and find the perfect fit for your needs, including vehicle diagnostics, code reading, and basic module programming. With the right OBD2 programmer, you can efficiently maintain and troubleshoot your vehicle’s systems.

1. Understanding OBD2 Programmers

What exactly is an OBD2 programmer? Let’s clarify this and explore its benefits. An OBD2 programmer, also known as an OBD2 scanner or code reader, is a device used to access and modify the data within a vehicle’s On-Board Diagnostics (OBD) system. These devices connect to a car’s OBD2 port, typically located under the dashboard, and allow users to read diagnostic trouble codes (DTCs), view live data, and perform certain programming functions.

The Society of Automotive Engineers (SAE) developed the OBD2 standard to provide a standardized way to monitor and diagnose vehicle systems. According to a study by the SAE International Journal of Transportation Safety, OBD2 systems have significantly improved vehicle diagnostics and emissions monitoring since their introduction in the mid-1990s.

1.1. Key Functions of OBD2 Programmers

What are the primary functions of an OBD2 programmer? Here are some of the common functionalities:

• Reading Diagnostic Trouble Codes (DTCs): Retrieves codes indicating problems within the vehicle’s systems.
• Clearing DTCs: Erases stored codes after repairs, turning off the check engine light.
• Live Data Streaming: Displays real-time sensor data, such as engine RPM, coolant temperature, and O2 sensor readings.
• Module Programming: Allows reprogramming of certain electronic control units (ECUs) for updates or modifications.
• Vehicle Information Retrieval: Accesses the vehicle identification number (VIN) and other vehicle-specific data.
• Freeze Frame Data: Captures data from when a DTC was triggered, providing a snapshot of conditions at the time of the fault.

1.2. Why Choose a Cheap OBD2 Programmer?

Why should you consider a budget-friendly OBD2 programmer? A cheap OBD2 programmer can be a great option for DIY enthusiasts, hobbyists, and those who need basic diagnostic capabilities without the hefty price tag of professional-grade tools.

According to a 2022 survey by the Automotive Aftermarket Suppliers Association (AASA), more vehicle owners are engaging in DIY maintenance and repairs, making affordable diagnostic tools increasingly popular.

1.2.1. Benefits of Affordable OBD2 Programmers

What are the advantages of using a more affordable option? Here are a few benefits:

• Cost-Effectiveness: Lower initial investment compared to professional-grade scanners.
• Ease of Use: Often designed with user-friendly interfaces, suitable for beginners.
• Portability: Compact and easy to store in your vehicle for on-the-go diagnostics.
• Basic Functionality: Provides essential features like reading and clearing codes, which can address many common issues.
• Sufficient for Simple Tasks: Ideal for routine maintenance, quick diagnostics, and verifying repairs.

1.3. Limitations of Cheap OBD2 Programmers

What are the drawbacks of choosing a cheap OBD2 programmer? While cost-effective, budget OBD2 programmers have limitations:

• Limited Functionality: May not support advanced features like bidirectional control, module programming, or access to manufacturer-specific codes.
• Compatibility Issues: Some cheaper models may have limited vehicle compatibility or may not support newer vehicle models.
• Software Updates: Updates may be infrequent or unavailable, potentially limiting the scanner’s ability to diagnose newer vehicles.
• Accuracy and Reliability: Lower-quality components can affect the accuracy and reliability of the diagnostic data.
• Customer Support: Limited or non-existent customer support can be an issue if you encounter problems.

2. Key Features to Look For in a Cheap OBD2 Programmer

What features should you prioritize when selecting an affordable OBD2 programmer? When choosing a cheap OBD2 programmer, focus on these key features to ensure it meets your diagnostic needs:

2.1. Compatibility

Is the programmer compatible with your vehicle? Compatibility is crucial. Ensure the programmer supports your vehicle’s make, model, and year.

2.1.1. How to Check Compatibility

How can you verify compatibility before purchasing? Here’s what to do:

• Check the Product Description: Reputable manufacturers provide compatibility lists.
• Read User Reviews: See if other users with similar vehicles have had success.
• Visit the Manufacturer’s Website: Look for compatibility checkers or FAQs.
• Contact Customer Support: Ask the seller or manufacturer directly to confirm compatibility.

2.2. Functionality

What functions are essential for your diagnostic needs? Determine the functions you need. At a minimum, ensure it can read and clear DTCs.

2.2.1. Essential Functions for Basic Diagnostics

Which functions are crucial for simple troubleshooting? Here are the most important:

• Read and Clear DTCs: Essential for diagnosing and resolving common issues.
• Live Data Stream: Useful for monitoring sensor data in real time.
• Freeze Frame Data: Helps analyze conditions when a fault occurred.
• I/M Readiness: Checks if your vehicle is ready for emissions testing.

2.3. Ease of Use

Is the programmer user-friendly? A simple and intuitive interface is important, especially for beginners.

2.3.1. Key Elements of a User-Friendly Interface

What makes an OBD2 programmer easy to use? Here’s what to look for:

• Clear Display: A large, backlit screen that is easy to read.
• Intuitive Navigation: Simple menus and buttons for easy navigation.
• Multilingual Support: Options to display information in different languages.
• Helpful Definitions: Built-in explanations of DTCs and diagnostic terms.

2.4. Update Availability

Can the programmer be updated? Software updates ensure compatibility with newer vehicles and access to the latest DTCs.

2.4.1. Why Updates Matter

Why are software updates important? Updates keep your programmer current:

• New Vehicle Support: Adds compatibility for newer models.
• Expanded DTC Database: Includes new diagnostic codes.
• Bug Fixes: Resolves software issues and improves performance.
• Feature Enhancements: Introduces new capabilities and improvements.

2.5. Build Quality and Durability

Is the programmer built to last? Look for a robust design that can withstand regular use.

2.5.1. Assessing Build Quality

How can you determine the durability of an OBD2 programmer? Consider these factors:

• Housing Material: Look for durable materials like ABS plastic.
• Connector Quality: Ensure the OBD2 connector is sturdy and fits securely.
• Button and Screen Protection: Check for recessed buttons and scratch-resistant screens.

3. Top Cheap OBD2 Programmers on the Market

What are some of the best affordable OBD2 programmers available? Here are some top-rated, budget-friendly options:

3.1. Autel MaxiLink ML619

The Autel MaxiLink ML619 offers a blend of essential features and ease of use. According to Autel’s official website, this tool is designed for reading and clearing DTCs, accessing live data, and performing basic diagnostics.

3.1.1. Key Features of the Autel MaxiLink ML619

What makes the Autel MaxiLink ML619 stand out?

• OBD2 Diagnostics: Reads and clears generic and manufacturer-specific DTCs.
• ABS/SRS Diagnostics: Diagnoses anti-lock braking systems (ABS) and supplemental restraint systems (SRS).
• Live Data Stream: Displays real-time sensor data.
• DTC Lookup: Provides detailed code definitions.
• User-Friendly Interface: Easy to navigate with clear menus.
• Updateable Software: Keeps the tool compatible with newer vehicles.

3.2. FOXWELL NT301

The FOXWELL NT301 is another popular choice for those seeking an affordable OBD2 scanner. FOXWELL’s product page highlights its wide vehicle coverage and comprehensive diagnostic functions.

3.2.1. Key Features of the FOXWELL NT301

What are the notable features of the FOXWELL NT301?

• OBD2 Diagnostics: Reads and clears DTCs for a wide range of vehicles.
• I/M Readiness Check: Verifies emissions readiness.
• Live Data Stream: Monitors real-time sensor data.
• Freeze Frame Data: Captures data when a fault occurred.
• O2 Sensor Test: Tests oxygen sensor performance.
• EVAP System Test: Checks evaporative emissions control system.
• Multilingual Support: Offers multiple language options.

3.3. BlueDriver Bluetooth Professional OBDII Scan Tool

The BlueDriver Bluetooth Professional OBDII Scan Tool stands out due to its wireless connectivity and smartphone integration. According to information available on the BlueDriver website, this tool pairs with your smartphone or tablet via Bluetooth, providing advanced diagnostic capabilities.

3.3.1. Key Features of the BlueDriver Bluetooth Professional OBDII Scan Tool

What are the standout features of the BlueDriver?

• Bluetooth Connectivity: Connects wirelessly to your smartphone or tablet.
• Enhanced Diagnostics: Accesses advanced diagnostics like ABS, SRS, and transmission codes.
• Live Data: Displays real-time sensor data.
• Repair Reports: Provides code-specific fix suggestions.
• Vehicle-Specific Information: Accesses manufacturer-specific data.
• User-Friendly App: Easy-to-use app for iOS and Android devices.

3.4. Innova 3100j

The Innova 3100j is a reliable and user-friendly OBD2 scanner designed for basic diagnostics. According to Innova’s official product page, this tool is ideal for reading and clearing codes, viewing live data, and performing basic system checks.

3.4.1. Key Features of the Innova 3100j

What makes the Innova 3100j a solid choice?

• OBD2 Diagnostics: Reads and clears DTCs for OBD2-compliant vehicles.
• ABS Code Reading: Reads ABS codes for many popular vehicles.
• Battery and Charging System Test: Checks battery voltage and alternator output.
• Live Data Stream: Displays real-time sensor data.
• Freeze Frame Data: Captures data when a fault occurred.
• Emission Readiness Test: Verifies emissions readiness.
• Tri-lingual Display: Shows code definitions in English, Spanish, and French.

3.5. Launch CR319

The Launch CR319 is a compact and affordable OBD2 scanner that offers essential diagnostic features. According to Launch Tech USA, this tool is designed for reading and clearing codes, accessing live data, and performing basic system checks.

3.5.1. Key Features of the Launch CR319

What are the key features of the Launch CR319?

• OBD2 Diagnostics: Reads and clears DTCs for OBD2-compliant vehicles.
• Live Data Stream: Displays real-time sensor data.
• Freeze Frame Data: Captures data when a fault occurred.
• I/M Readiness Status: Checks emissions readiness.
• DTC Lookup: Provides detailed code definitions.
• Plug and Play: Easy to use with no battery required.
• Compact Design: Portable and easy to store.

4. How to Use a Cheap OBD2 Programmer

How do you effectively use an OBD2 programmer? Here’s a step-by-step guide:

4.1. Connecting the Programmer

How do you properly connect the OBD2 programmer to your vehicle?

1. Locate the OBD2 Port: Typically found under the dashboard on the driver’s side.
2. Turn Off the Ignition: Ensure the vehicle is turned off before connecting.
3. Plug in the Programmer: Firmly insert the OBD2 connector into the port.
4. Turn on the Ignition: Turn the ignition to the “ON” position without starting the engine.

4.2. Reading Diagnostic Trouble Codes (DTCs)

How do you retrieve DTCs from your vehicle’s computer?

1. Power On the Programmer: The scanner should power on automatically.
2. Select “Read Codes”: Navigate to the “Read Codes” or “Diagnostic Codes” option.
3. View the DTCs: The programmer will display any stored DTCs.
4. Record the Codes: Write down the codes for reference.

4.3. Understanding the Codes

What do the DTCs mean? DTCs consist of a five-character alphanumeric code.

4.3.1. Decoding DTCs

How can you interpret these codes? Here’s a breakdown:

• First Character: Indicates the system (e.g., P for Powertrain, B for Body, C for Chassis, U for Network).
• Second Character: Specifies whether the code is generic (0) or manufacturer-specific (1).
• Third Character: Identifies the subsystem (e.g., fuel system, ignition system).
• Fourth and Fifth Characters: Indicate the specific fault within the subsystem.

4.4. Clearing Diagnostic Trouble Codes (DTCs)

How do you erase the codes after addressing the issue?

1. Repair the Issue: Fix the problem indicated by the DTC.
2. Select “Erase Codes”: Navigate to the “Erase Codes” or “Clear Codes” option.
3. Confirm the Erase: Follow the prompts to confirm the action.
4. Verify the Clear: Restart the vehicle and check if the check engine light is off.

Important Note: Clearing codes without fixing the underlying issue will only result in the codes returning.

4.5. Live Data Streaming

How can you view real-time sensor data?

1. Select “Live Data”: Navigate to the “Live Data” or “Data Stream” option.
2. Choose Data Parameters: Select the sensors you want to monitor (e.g., engine RPM, coolant temperature).
3. View Real-Time Data: The programmer will display the data in real time.

5. Common OBD2 Codes and Their Meanings

What are some of the most frequently encountered OBD2 codes?

5.1. P0171 – System Too Lean (Bank 1)

What does this code indicate? This code suggests that the engine is running lean, meaning there is too much air and not enough fuel in the air-fuel mixture.

5.1.1. Possible Causes of P0171

What could be causing this lean condition?

• Vacuum Leak: Leaks in vacuum lines can allow extra air into the engine.
• Faulty O2 Sensor: An inaccurate oxygen sensor can cause incorrect readings.
• Dirty Mass Airflow (MAF) Sensor: A contaminated MAF sensor can misread airflow.
• Fuel Delivery Issues: Problems with the fuel pump, fuel filter, or fuel injectors.

5.2. P0300 – Random Misfire Detected

What does this code signify? This code indicates that the engine is experiencing random misfires, meaning one or more cylinders are not firing properly.

5.2.1. Possible Causes of P0300

What might be causing these random misfires?

• Faulty Spark Plugs: Worn or damaged spark plugs.
• Ignition Coil Issues: Problems with the ignition coils.
• Vacuum Leaks: Leaks in vacuum lines.
• Low Fuel Pressure: Insufficient fuel delivery.
• Engine Compression Issues: Problems with cylinder compression.

5.3. P0420 – Catalyst System Efficiency Below Threshold (Bank 1)

What does this code mean? This code indicates that the catalytic converter is not functioning efficiently.

5.3.1. Possible Causes of P0420

What could be causing this catalytic converter inefficiency?

• Faulty Catalytic Converter: The catalytic converter is worn out or damaged.
• O2 Sensor Issues: Problems with the oxygen sensors.
• Exhaust Leaks: Leaks in the exhaust system.
• Engine Issues: Problems with the engine causing excessive emissions.

6. Advanced Uses of OBD2 Programmers

What more can you do with an OBD2 programmer beyond basic diagnostics?

6.1. Module Programming

Can you reprogram vehicle modules with a cheap OBD2 programmer? Module programming involves updating or reprogramming the electronic control units (ECUs) in your vehicle.

6.1.1. What is Module Programming?

What does this process entail? Module programming can address issues like:

• Software Updates: Applying the latest software updates to improve performance.
• ECU Replacement: Reprogramming a new ECU to match the vehicle’s specifications.
• Performance Tuning: Modifying ECU parameters to enhance engine performance.

Note: Module programming is an advanced function and typically requires professional-grade tools and expertise. Cheap OBD2 programmers may not support this feature or may have limited capabilities.

6.2. Bi-Directional Control

What is bi-directional control, and can you use it with a cheap OBD2 programmer? Bi-directional control allows you to send commands to the vehicle’s systems to test their functionality.

6.2.1. Examples of Bi-Directional Control Functions

What can you control with this feature?

• Activating Fuel Injectors: Testing fuel injector performance.
• Cycling ABS Pump: Bleeding the ABS system.
• Operating Cooling Fans: Verifying cooling fan operation.
• Retracting Electronic Parking Brake: Servicing the parking brake system.

Note: Bi-directional control is typically found in more advanced, professional-grade OBD2 scanners. Cheap OBD2 programmers may not offer this functionality.

6.3. Customizing Vehicle Settings

Can you customize vehicle settings with an OBD2 programmer? Some advanced OBD2 programmers allow you to customize certain vehicle settings.

6.3.1. Examples of Customizable Settings

What settings can you potentially adjust?

• Daytime Running Lights: Enabling or disabling daytime running lights.
• Remote Start Features: Adjusting remote start settings.
• Door Lock Settings: Customizing door lock behavior.
• Gauge Display: Changing the information displayed on the instrument panel.

Note: The ability to customize vehicle settings varies depending on the vehicle and the OBD2 programmer. Cheap OBD2 programmers may have limited customization options.

7. Tips for Choosing the Right Cheap OBD2 Programmer

How can you make the best choice when selecting an affordable OBD2 programmer?

7.1. Read User Reviews

What do other users say about the programmer? User reviews provide valuable insights into the performance, reliability, and ease of use of the programmer.

7.1.1. What to Look for in User Reviews

What should you pay attention to in the reviews?

• Compatibility: Does the programmer work with a wide range of vehicles?
• Ease of Use: Is the interface intuitive and user-friendly?
• Reliability: Does the programmer provide accurate and consistent results?
• Customer Support: Is the customer support helpful and responsive?
• Update Availability: Are software updates readily available?

7.2. Compare Features and Specifications

How do the different models compare in terms of features? Compare the features and specifications of different OBD2 programmers to determine which one best meets your needs.

7.2.1. Key Specifications to Compare

What specifications should you focus on?

• Compatibility: Vehicle makes, models, and years supported.
• Functionality: Diagnostic functions, live data parameters, special tests.
• Display: Screen size, resolution, and clarity.
• Update Availability: Frequency and cost of software updates.
• Warranty: Length and coverage of the warranty.
• Customer Support: Availability and quality of customer support.

7.3. Consider Your Diagnostic Needs

What type of diagnostics do you plan to perform? Choose an OBD2 programmer that aligns with your diagnostic needs and skill level.

7.3.1. Matching the Programmer to Your Needs

How can you ensure the programmer is suitable for your tasks?

• Basic Diagnostics: Reading and clearing codes, viewing live data.
• Intermediate Diagnostics: ABS/SRS diagnostics, O2 sensor testing.
• Advanced Diagnostics: Module programming, bi-directional control.

7.4. Check for Warranty and Support

Does the programmer come with a warranty and customer support? A warranty protects you from defects, and customer support can help you troubleshoot issues.

7.4.1. What to Look for in a Warranty

What should the warranty cover?

• Length of Coverage: Longer warranties provide more protection.
• Coverage Details: What types of defects are covered?
• Support Options: Availability of phone, email, or online support.

8. Maintaining Your Cheap OBD2 Programmer

How can you keep your OBD2 programmer in good working condition?

8.1. Keep the Software Updated

How important is it to keep the software up to date? Regularly update the software to ensure compatibility with newer vehicles and access to the latest features.

8.1.1. How to Update the Software

What steps should you take to update the software?

1. Visit the Manufacturer’s Website: Check for available updates.
2. Download the Update: Download the latest software version.
3. Connect the Programmer to Your Computer: Use a USB cable to connect the programmer.
4. Install the Update: Follow the instructions to install the software update.

8.2. Store the Programmer Properly

How should you store the programmer when not in use? Store the programmer in a clean, dry place to protect it from damage.

8.2.1. Best Storage Practices

What are the ideal storage conditions?

• Avoid Extreme Temperatures: Store the programmer away from direct sunlight and extreme heat or cold.
• Keep it Dry: Protect the programmer from moisture and humidity.
• Use a Protective Case: Store the programmer in a case to prevent scratches and damage.

8.3. Handle with Care

How should you handle the programmer during use? Handle the programmer with care to avoid dropping or damaging it.

8.3.1. Proper Handling Techniques

What are some tips for handling the programmer safely?

• Avoid Dropping: Hold the programmer securely to prevent accidental drops.
• Protect the Screen: Keep the screen clean and scratch-free.
• Secure the Connector: Ensure the OBD2 connector is properly aligned and securely inserted into the port.

9. OBD2 Programmer Brands

What brands are reputable for their OBD2 programmers?

9.1. Autel

Autel is a well-known brand in the automotive diagnostics industry, offering a wide range of OBD2 scanners and diagnostic tools. According to Autel’s official website, their products are designed for both DIY enthusiasts and professional technicians, known for their advanced features, reliability, and user-friendly interfaces.

9.2. FOXWELL

FOXWELL is another reputable brand specializing in diagnostic tools and equipment. FOXWELL’s product page emphasizes their commitment to providing innovative and cost-effective solutions for vehicle diagnostics, known for their wide vehicle coverage and comprehensive diagnostic functions.

9.3. Innova

Innova is a trusted brand that offers a variety of OBD2 scanners and diagnostic tools. According to Innova’s official product page, their products are designed to be user-friendly and reliable, suitable for both DIYers and professional mechanics, known for their accurate diagnostics and ease of use.

9.4. Launch

Launch Tech USA is a global leader in automotive diagnostic equipment and solutions. According to Launch Tech USA, their products are designed to provide comprehensive diagnostic capabilities and innovative features, known for their advanced technology and wide range of applications.

10. Ethical Considerations When Using OBD2 Programmers

What ethical considerations should you keep in mind when using OBD2 programmers?

10.1. Respecting Vehicle Warranties

How can you avoid voiding your vehicle’s warranty? Modifying or tampering with your vehicle’s systems using an OBD2 programmer can void the warranty. Be cautious and avoid making changes that could affect the vehicle’s performance or safety.

10.1.1. What Actions Can Void a Warranty?

What types of modifications should you avoid?

• ECU Tuning: Modifying the engine control unit parameters.
• Disabling Safety Features: Turning off or altering safety systems.
• Altering Emissions Systems: Tampering with emissions control devices.

10.2. Protecting Vehicle Data

How can you protect your vehicle’s data from unauthorized access? Be mindful of the data you access and modify with an OBD2 programmer. Avoid sharing sensitive information and take steps to protect your vehicle’s computer system from unauthorized access.

10.2.1. Data Protection Measures

What steps can you take to protect your vehicle’s data?

• Use Secure Connections: Avoid using public Wi-Fi networks when connecting to your vehicle.
• Update Software: Keep your OBD2 programmer and vehicle software up to date.
• Be Cautious with Third-Party Apps: Avoid using unverified or untrusted apps.

10.3. Following Legal Regulations

How can you ensure you are complying with all relevant laws and regulations? Be aware of local laws and regulations regarding vehicle modifications and emissions standards. Ensure that any changes you make with an OBD2 programmer comply with these regulations.

10.3.1. Key Regulations to Be Aware Of

What are some of the important regulations to keep in mind?

• Emissions Standards: Compliance with local emissions regulations.
• Vehicle Safety Standards: Adherence to vehicle safety standards.
• Data Privacy Laws: Compliance with data privacy laws.

FAQ about Cheap OBD2 Programmers

Do you have questions about cheap OBD2 programmers? Here are some frequently asked questions:

What is an OBD2 programmer?

An OBD2 programmer is a tool used to read and clear diagnostic trouble codes (DTCs), view live data, and perform certain programming functions on a vehicle’s On-Board Diagnostics (OBD) system.

Can a cheap OBD2 programmer reprogram a car’s computer?

Some cheap OBD2 programmers can perform basic module programming, but advanced reprogramming typically requires professional-grade tools.

Are cheap OBD2 programmers reliable?

Reliability varies, but reputable brands offer affordable options with good performance. Reading user reviews can help you find a reliable cheap OBD2 programmer.

What is the difference between an OBD2 scanner and an OBD2 programmer?

The terms are often used interchangeably, but “programmer” may imply more advanced functions like module programming, while “scanner” typically refers to basic diagnostic functions.

How do I update the software on my OBD2 programmer?

Visit the manufacturer’s website, download the latest software version, connect the programmer to your computer via USB, and follow the installation instructions.

Can I use an OBD2 programmer on any car?

Most OBD2 programmers are compatible with OBD2-compliant vehicles, which include most cars and light trucks manufactured after 1996 in the United States. Check the programmer’s compatibility list to ensure it supports your vehicle.

What does the check engine light mean?

The check engine light indicates a problem within the vehicle’s systems. Use an OBD2 programmer to read the diagnostic trouble codes (DTCs) and identify the issue.

Can I clear the check engine light with an OBD2 programmer?

Yes, you can clear the check engine light after repairing the underlying issue. However, the light will return if the problem is not resolved.

Is it safe to use an OBD2 programmer?

Yes, it is generally safe to use an OBD2 programmer as long as you follow the manufacturer’s instructions and avoid making unauthorized modifications to the vehicle’s systems.

Where can I buy a cheap OBD2 programmer?

You can buy cheap OBD2 programmers from online retailers like Amazon, eBay, and Walmart, as well as from auto parts stores and diagnostic tool suppliers.

Conclusion

Finding the best cheap OBD2 programmer involves balancing cost with functionality and compatibility. By focusing on essential features, reading user reviews, and understanding your diagnostic needs, you can choose an affordable tool that helps you maintain and troubleshoot your vehicle effectively. With the right OBD2 programmer, you’ll be well-equipped to handle a wide range of diagnostic tasks and keep your vehicle running smoothly.

Do you need expert guidance on using an OBD2 scanner or require professional car repair services? Contact us at OBD2-SCANNER.EDU.VN today. Our team of experienced technicians is ready to assist you with all your automotive diagnostic and repair needs. Reach us at 123 Main Street, Los Angeles, CA 90001, United States. Call or WhatsApp us at +1 (641) 206-8880, or visit our website at OBD2-SCANNER.EDU.VN for more information. Let us help you keep your vehicle in top condition.